The higher then number for MRR, the better. Width of cut x Depth of cut x Feed in Inches Per Minute = Metal removal rate in cubic inches per minute For this you must calculate the MRR, Metal Removal Rate, of the toolpath. These make for great stories but don't show overall efficiency. When trying to push cutters to their limits, some often get caught up in high feedrates and spindle speeds. Morph, Parallel, Along Curve and Project Curve are. One of the top improvements is the ability to consolidate multi-axis toolpaths. When using HEM, you will be limited to only a few selections for the stepover percentage whereas with RCTF, you can define any value you want. CNC Software’s Mastercam 2023 features multi-axis, mill-turn advancements, which were directly driven by feedback from Mastercam users and shops. Mastercam displays the corresponding feed rate and spindle speed values below the field. When you enter the maximum HEM Factor allowed by the machine and tool configuration, Mastercam displays a message marked with an asterisk and marks the threshold value in the same manner.īoth RCTF and HEM are effected by the stepover percentage used in the toolpath. You can enter a value from 1 up to 5, depending on the selected machine and tool configuration. Enter a value in the field or use the slider positioned directly above the field to adjust it. HEM Factor - Adjusts the ISCAR tool's feed rate and spindle speed values to achieve maximum speed and efficiency.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |